MPO patch panel
MPO patch panel
TW-4U48MDD 1U/2U/4U MTP/MPO LC 96/144/288/576 Fibers Optic Patch Panel chassis 8/12//24/48Modules.
The MPO/MTP® Slim Ultra Patch Panels provide secure transitions
between MPO/MTP® and LC discrete connector interfaces. They are used
to interface MPO/MTP® backbones with LC patching and active
equipment connections
Features:
19" rack mount, Color black.
Baffles are used where adapters are not installed.
Reliability - 100% Tested.Factory terminated and tested.
Front cable management function:Cable can be routed to the front of
the cable management bar, either from the left or the right side.
Rear cable management function:Cable can be routed to the rear of the
cable management bar, from both sides.
4U patch panel capacity comes up to 576F fully loaded , up to
12 MPO/MTP® standard connectors.
TW-MP2 2U MTP/MPO LC 288 Fibers Optic Patch Panel chassis 12 Modules
The MPO/MTP® Slim Ultra Patch Panels provide secure transitions
between MPO/MTP® and LC discrete connector interfaces. They are used
to interface MPO/MTP® backbones with LC patching and active
equipment connections
Features:
19" rack mount, Color black.
Baffles are used where adapters are not installed.
Reliability - 100% Tested.Factory terminated and tested.
Front cable management function:Cable can be routed to the front of
the cable management bar, either from the left or the right side.
Rear cable management function:Cable can be routed to the rear of the
cable management bar, from both sides.
2U patch panel capacity comes up to 28F fully loaded , up to
12 MPO/MTP® standard connectors.
TW-MP4 1U MTP/MPO LC 144 Fibers Angled Patch Panel chassi
The MPO/MTP® Slim Ultra Patch Panels provide secure transitions
between MPO/MTP® and LC discrete connector interfaces. They are used
to interface MPO/MTP® backbones with LC patching and active
equipment connections
Features:
19" rack mount, Color black.
Baffles are used where adapters are not installed.
Reliability - 100% Tested.Factory terminated and tested.
Front cable management function:Cable can be routed to the front of
the cable management bar, either from the left or the right side.
Rear cable management function:Cable can be routed to the rear of the
cable management bar, from both sides.
1U patch panel capacity comes up to 144F fully loaded , up to
12 MPO/MTP® standard connectors.
MPO patch panel
MPO patch panel
TW-OMP2 1U MTP/MPO LC 144 Fibers Slim Ultra Patch Panel
The MPO/MTP® Slim Ultra Patch Panels provide secure transitions
between MPO/MTP® and LC discrete connector interfaces. They are used
to interface MPO/MTP® backbones with LC patching and active
equipment connections
Features:
19" rack mount, Color black.
Baffles are used where adapters are not installed.
Reliability - 100% Tested.Factory terminated and tested.
Front cable management function:Cable can be routed to the front of
the cable management bar, either from the left or the right side.
Rear cable management function:Cable can be routed to the rear of the
cable management bar, from both sides.
1U patch panel capacity comes up to 144F fully loaded , up to
12 MPO/MTP® standard connectors.
TW-MP2 1U MTP/MPO LC 120 fibers Slim Ultra Patch Panel 5 Modules
MPO 1U Patch Panel is used in data center cabling region, and connected the ports with cable to the back of the panel. it is usually assembled in 19 inch frame rack and cabinet. You can assemble with LC adapter panel. and it can finish 1U 96 cores splicing.
Features:
1.Can install 5pcs 24xLC cassettes,and manage 120 cores max;
2.Assembled with 5 pcs thin 24C fusion splice plates, can reach 120 cores; We also put the cable fasten device, and it can make the installation convenient;
3.Produced with high-quality cold-rolled steel sheet, the main body's depth is 1.5mm;
4.Removable cable management, look elegant and use conveniently;
5.No fur, no bubble, no screw to fasten, snap-in top cover can be opened without any tools.
TW-MP31U MTP/MPO LC Slim Ultra Patch Panel 3 Modules
MPO 1U Patch Panel is used in data center cabling region, and connected the ports with cable to the back of the panel. it is usually assembled in 19 inch frame rack and cabinet. You can assemble with LC adapter panel. and it can finish 1U 96 cores splicing.
Features:
1.Can install 4pcs 24xLC cassettes,and manage 96 cores max;
2.Assembled with 4 pcs thin 24C fusion splice plates, can reach 96 cores; We also put the cable fasten device, and it can make the installation convenient;
3.Produced with high-quality cold-rolled steel sheet, the main body's depth is 1.5mm;
4.Removable cable management, look elegant and use conveniently;
5.No fur, no bubble, no screw to fasten, snap-in top cover can be opened without any tools.
MPO patch panel
MPO patch panel
1U 19" Simply Type LC, SC, ST,FC,MPO/MTP Module High Density Fiber Optic Patch Panel
MPO 1U simply type Patch Panel is used in data center cabling region, and connected the ports with cable to the back of the panel. it is usually assembled in 19 inch frame rack and cabinet. You can assemble MPO cassette、MPO adapter panel and LC adapter panel.
Features:
Can install 4pcs MPO cassettes,and manage 96 cores max;
Can install 4pcs MPO adapter panel, and manage 288 cores max;
Produced with high-quality cold-rolled steel sheet;
Itself include 1U cable management, look elegant and convenient;
No fur, no bubble, no screw to fasten, can be opened without any tools;
With light and compact body, operate conveniently,cabling quickly.
TW-DR07 1U 19" Sliding Type LC, SC, ST,FC,MPO/MTP Module High Density Fiber Optic Patch Panel
MPO 1U Patch Panel is used in data center cabling region, and connected the ports with cable to the back of the panel. it is usually assembled in 19 inch frame rack and cabinet. You can assemble with LC adapter panel. and it can finish 1U 96 cores splicing.
Features:
1.Can install 4pcs 24xLC cassettes,and manage 96 cores max;
2.Assembled with 4 pcs thin 24C fusion splice plates, can reach 96 cores; We also put the cable fasten device, and it can make the installation convenient;
3.Produced with high-quality cold-rolled steel sheet, the main body's depth is 1.5mm;
4.Removable cable management, look elegant and use conveniently;
5.No fur, no bubble, no screw to fasten, snap-in top cover can be opened without any tools.
TW-RM08 1U 19" Sliding Type LC, SC, ST,FC,MPO/MTP Module High Density Fiber Optic Patch Panel
MPO 1U Patch Panel is used in data center cabling region, and connected the ports with cable to the back of the panel. it is usually assembled in 19 inch frame rack and cabinet. You can assemble with LC adapter panel. and it can finish 1U 96 cores splicing.
Features:
1.Can install 4pcs 24xLC cassettes,and manage 96 cores max;
2.Assembled with 4 pcs thin 24C fusion splice plates, can reach 96 cores; We also put the cable fasten device, and it can make the installation convenient;
3.Produced with high-quality cold-rolled steel sheet, the main body's depth is 1.5mm;
4.Removable cable management, look elegant and use conveniently;
5.No fur, no bubble, no screw to fasten, snap-in top cover can be opened without any tools.